Structurally, a flash drive consists of interface slot, controller and memory microchips.
if you want to recover data from the drive that is not detected by PC when connected to motherboard, or a message appears that the drive is not accessible, do the following:
1. Unsolder memory microchips of the drive with the help of a soldering station.
2. Read data from microchips with the special reading device - PC Flash Reader.
3. Launch PC-3000 Flash SSD Edition tool, get a result in a form of disk image with user data.
PC-3000 Flash SSD Edition has a great number of completely automatic data recovery methods and methods that allow to manually execute single actions of the whole process:
To make reading process automatic, PC-3000 Flash SSD Edition solution has a great database of flash memory microchips.
Besides automatic modes of data recovery and analysis, our solution offers wide opportunities for individual study of recovery task with the help of large range of special utilities.
WHICH PROBLEMS CAN I SOLVE USING PC-3000 FLASH SSD EDITION?
PC-3000 Flash SSD Edition allows you to successfully recover data from flash drives at:
physical damages of the drive:
- damaged USB ports
- damaged controller microchip
- malfunctions of electonic units
- damaged logical board because of mechanical impact
logical damages of file system
data deleted by error
software errors after which data are not read or lost (drive was disconnected during data transfer)
defects in service area used by controller in translation mechanism.
